Road Base Delivery in Clovis, CA
Bulk road base delivered in Clovis, CA. Stone size varies. Gray color.
Road Base in the Fresno Area and Clovis
Clovis and the broader Fresno metropolitan area depend on reliable base materials for construction and property maintenance. The region's terrain and soil conditions make quality road base an essential choice for projects ranging from residential driveway replacement to light commercial work. Road base material performs consistently in Fresno's climate, handling temperature swings and seasonal moisture changes while maintaining its structural integrity. Contractors and builders throughout Clovis recognize road base as the proven foundation material that prevents costly future repairs and failure.
Best Uses for Road Base in Clovis
Driveways are the primary application for road base in residential Clovis. The material compacts into a firm, level platform that supports asphalt or concrete without settling. Contractors use road base for temporary access roads at job sites, equipment pads, and foundation work throughout the Fresno area. Landscapers order it for retaining wall bases, French drain foundations, and other applications combining drainage with structural stability. If you're building or rebuilding a parking area, patio base, or foundation pad, road base provides the solid platform that prevents cracking and settlement. Professional contractors throughout Clovis trust road base for its reliable performance and compactibility.
How Much Material You Need
Measure your project area length and width, then determine your desired compacted depth. Most driveways call for 4 to 6 inches of road base before asphalt or concrete goes down. A 20-foot by 40-foot driveway at 5 inches requires approximately 10 tons of material. Use the calculator to convert your specific measurements to tons. The calculator shows loose material volume, but road base compacts down about 20 percent once in place and properly tamped with a compactor. If your estimate is uncertain, order slightly extra; leftover material spreads across your site or stores for future repairs.
Delivery and Lead Times to Clovis
Road base is sold and shipped by the ton. Orders of 3 tons deliver in 1 to 2 business days, while 8-ton orders often qualify for same-day or next-day service. Orders totaling 15 tons or higher include free delivery service. Your delivery window comes with your quote so you can schedule site prep. Clovis location means reasonable delivery times compared to distant sources. Standard truck loads run 18 to 24 tons, so coordinate with your contractor if multiple deliveries are needed. Most Clovis projects receive their material within 48 hours of order placement.
Pricing for Road Base
Road base is sold by the ton. Smaller orders of 3 tons cost more per ton because delivery charges don't scale down proportionally. As order size grows to 8 or 15 tons, your per-ton rate drops because you spread delivery costs across more material. At 15 tons or more, you reach the bulk rate and get free delivery, providing the best per-ton value. Your quote will show the exact delivery cost to your location. Many Clovis contractors find that ordering 15 tons for substantial projects provides better value than splitting across multiple smaller deliveries.
Ordering Your Road Base
Start with the material calculator to estimate how many tons your project needs. Call or submit the online form to complete your order and ensure the truck can reach your location. Make sure your site has clear access and adequate staging space for an 18 to 24-ton truck. We'll schedule delivery in Clovis based on your timing needs. After material arrives, compact it in 3 to 4-inch layers using a plate compactor, vibratory roller, or hand tamper. Light dampening helps the material bind as you work. Once you have a solid, level base, pour concrete, lay asphalt, or install your finished surface. Many contractors handle compaction themselves on smaller projects, while larger jobs bring in professional equipment or services.
Road Base Quality Statewide
Road Base in California maintains consistent engineered specifications across the state. Whether your project is in Clovis, the Fresno area, or anywhere else in California, you receive the same quality material: correct grain size, proven compactibility, and the clay-and-fines blend that binds solid under load.
About Road Base
Road base is a compactible aggregate blend of crushed stone, clay, and fines that forms a durable, load-bearing foundation layer. When properly compacted, road base develops stone-hard stability that prevents settling and cracking, making it essential for driveways, parking lots, roads, and construction sites. The mixture of stone and fines works together, with the clay helping larger particles bind under compression and traffic load. Road base is the industry standard for any project requiring a stable, long-lasting sub-base. Professional contractors rely on it for contractor access roads, equipment pads, foundation bases, and any application where structural performance matters over time.
What Road Base costs in Clovis
In the Clovis market, road base is sold by the ton and priced at the gate before delivery is added on. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. One ton covers about 76 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 6 tons.
How crews use Road Base in Clovis
Crews working out of Clovis tend to call for road base on a few repeat jobs each week. Order size in Clovis averages 4 to 8 tons for homeowner jobs and climbs into full-truck loads for contractor work.
Delivery day in Clovis
On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Clovis stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is 24-48h, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Clovis
Price by ZIP- SizeDense-graded, varies
- Density2900 lb/yd³
- ColorGray
Price by ZIP- Size0 - 1/4″
- Density2800 lb/yd³
- ColorGray
Price by ZIP- Size0 - 1/4″
- Density2800 lb/yd³
- ColorGray
Estimate how much you need
Calculate Your Project
Estimate only. Add 10-15% for compaction and waste.
Browse more
Common uses for Road Base in Clovis
Available in nearby cities
Plan your project
Related guides
GUIDEWhat Is Crushed Stone? Sizes, Uses and Buying BasicsCrushed stone is quarried rock crushed and screened into angular pieces sold by the ton. Here is what it is, how it is graded, and where to use it.Read guide →
GUIDEHow Much Does Gravel Cost? A Practical Pricing GuideHow much does gravel cost and why does it vary? See the real factors behind ton pricing, delivery, and order size before you buy.Read guide →GUIDEGravel Size Chart: Pea Gravel to Crushed StoneA gravel size chart showing pea gravel, crushed stone and river rock diameters side by side, so you can match the right size to your project.Read guide →
GUIDEThe Different Types of Gravel and How to ChooseA plain-language guide to the main types of gravel, covering pea gravel, crushed stone, river rock and decomposed granite.Read guide →Frequently Asked Questions
How does road base differ from crushed gravel?
Road base is an engineered mixture of crushed stone, clay, and fines formulated to compact tightly into a stable foundation. Crushed gravel alone lacks the binding elements and won't provide the same structural performance. Road base is designed for structural bases, while crushed gravel serves drainage or decorative purposes.
Can road base be left as a finished surface?
No. Road base must be covered with asphalt, concrete, pavers, or another wear surface. While it compacts firmly, it will shift under foot or vehicle traffic if left exposed. Always apply a protective layer on top to preserve the road base and create a usable surface.
How long does compacted road base last?
A properly compacted road base layer lasts many years, often 10 to 15 years or longer depending on traffic and drainage. Once firmly compacted, it won't need additional material unless the site experiences flooding, poor drainage, or heavy use without a top layer. Maintain the surface and ensure proper drainage for long life.
Do you deliver to residential properties in Clovis?
Yes, we deliver road base throughout Clovis and the Fresno area. Residential driveways and small construction sites are routine deliveries for us. Provide your address when ordering so we can confirm truck access and arrange a convenient delivery time.
What is the best way to compact road base?
Use a plate compactor, vibratory roller, or hand tamper depending on your project size. Compact in 3 to 4-inch layers, with light dampening to aid binding. Most contractors achieve good results with a few passes per layer. Proper compaction is essential to the material's structural strength.
Will road base stay in place on a slope?
Road base compacts well on level ground and gentle slopes, but may shift on steep grades, particularly with heavy traffic or inadequate drainage. For slopes, consult your contractor about angle or retaining structures. Each site has unique needs based on grade and drainage.
How fast can you deliver to Clovis?
A 3-ton order to Clovis typically arrives in 1 to 2 business days. Eight-ton loads usually qualify for same or next-day delivery. In Clovis, orders of 15 tons or more include free delivery. Turnaround depends on load scheduling, but we work to get material to Clovis quickly.
What is your minimum order?
For Clovis deliveries, our standard minimum order is 3 tons. Orders smaller than 3 tons are rarely economical because delivery fees apply regardless of volume. If you need less material, order 3 tons and use any extra for future repairs or nearby work.