Mason Sand
Sand · Tan

Mason Sand

Mason Sand delivered direct from local quarries to 50 US cities. Bulk pricing from $44/ton on full-load orders. Same-day delivery in most metros, free delivery on 16+ ton loads.

Weight 2700 lb/yd³ Color Tan Sold by ton
50US cities served
$44 to $60Per ton delivered
2700lb per cubic yard
24-48hTypical delivery window

About Mason Sand

Mason Sand is a sand material with a typical density of 2700 lbs per cubic yard. Clean, washed sand used for pipe bedding, paver leveling, masonry mortar, and playground surfaces; the grade you need depends on the application.

A typical residential order is 3-8 tons; full-load contractor orders run 16-24 tons. We deliver in tandem-axle dump trucks (10-16 ton capacity) or tri-axles (16-24 ton capacity). Pricing varies with regional quarry proximity, load size, and current diesel; full-load delivery typically saves 15-20% over partial loads.

Specifications

Category
Sand
Typical size
N/A, sold by volume
Color
Tan
Density
2700 lb/yd³  ·  1.35 tons per cubic yard
Sold by
The ton
Order minimum
1 ton (bag drop)  ·  4 tons (truck load)
Full-load discount
16+ tons, typical 15-20% off list
Delivery window
Same-day on orders before 11 AM in most metros · 24-48h standard
Free delivery threshold
16+ tons within the standard service radius

Coverage: how much Mason Sand do you need?

Quick reference: square feet covered by one ton at common spread depths. For exact tonnage, plug your dimensions into the material calculator.

120 sq ft @ 2" deep Mulch beds, decorative tops
80 sq ft @ 3" deep Walkways, patios, drainage
60 sq ft @ 4" deep Driveways, structural base

Best uses for Mason Sand

How to install Mason Sand

  1. 1
    Excavate to depth

    For pavers, dig 4-6" below finished grade; for masonry, just enough for joints.

  2. 2
    Screed for paver base

    1" of bedding sand, screeded level, is the gold standard under interlocking pavers.

  3. 3
    Don't over-compact

    Sand bedding is loose by design; compacting eliminates the leveling cushion.

  4. 4
    Sweep joint sand last

    Polymeric joint sand locks pavers; sweep dry, then mist to activate.

COMPARABLE

Comparable materials

Where we source Mason Sand

We source Mason Sand from local quarries within the delivery region, typically inside a 50-mile radius. Short hauls mean lower delivery cost for you and a smaller diesel footprint per ton.

Every load is weighed at the source and the ticket travels with the truck, so you get exact tonnage, not estimates. Quality varies by quarry; we work with operators whose product meets state DOT spec for the applications we recommend.

Why bulk delivery saves money

On a per-ton basis, retail bag pricing lands at about three times the bulk truck rate once you add up tax, the haul home in a passenger vehicle, and the bag waste. At our delivered range of $44 to $60 per ton, a 5 ton homeowner order saves hundreds versus the bagged equivalent at typical retail. A residential project usually runs 3 to 8 tons, which fits one tandem-axle truck and one drop. Contractors stepping up to 16 tons or more unlock our full-truck rate, which is generally 15 to 20 percent below the partial-load price. Bulk also wins on time: one delivery beats 20 trips to the rack, and the driver places the load where you want it instead of a parking-lot pallet.

Ordering Mason Sand from MyGravelBuddy

Send your ZIP and a target load size; the quote, freight, and lead time come back the same hour during business days. Confirm the tonnage and the drop location, and we lock the truck on the schedule, typically 24 to 48 hours out for in-area orders. Payment clears, dispatch sends the window the night before, and the driver calls when the truck leaves the scale. Get a Mason Sand quote

FAQ: Mason Sand

How much does Mason Sand cost?
2026 delivered prices range $44-$60 per ton across our service area. Pricing varies with quarry proximity, load size, and current diesel costs. Full-truck orders (16+ tons) typically save 15-20%.
How is Mason Sand sold, by ton or yard?
By the ton. One cubic yard of Mason Sand weighs about 2700 lbs, so a 5-yard order is roughly 6.8 tons.
How much do I need for a 80 sq ft project?
At a typical 3" finished depth, one ton of Mason Sand covers about 80 sq ft. Use the calculator for exact numbers.
How fast can you deliver?
Same-day delivery is available in most metros for orders placed before 11 AM. Standard lead time is 1-2 business days. Holidays and severe weather can push lead time to 3-4 days.
What's Mason Sand best used for?
Mason Sand is most commonly used for Driveway Gravel, Patio Gravel, Walkway Gravel, though it works for any project that calls for sand material.
What's the minimum order?
1-ton minimum for bag drops; 4-ton minimum for truck loads. Most homeowners order 3-8 tons.
Do you deliver Mason Sand nationwide?
We serve 50 US cities directly. If your city isn't listed, send your ZIP via the contact form and we can usually confirm coverage within an hour.
Can I pick up Mason Sand myself?
In some markets, yes. We can stage a will-call ticket at the quarry. Email us with your ZIP to confirm.
KEEP READING

Related guides

Buy Mason Sand now →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop