Welcome to My Gravel Buddy Company

Road Base
Construction & Base · Gray

Road Base

Road Base delivered direct from local quarries to 50 US cities. Bulk pricing from $31/ton on full-load orders. Same-day delivery in most metros, free delivery on 16+ ton loads.

Size varies" Weight 2850 lb/yd³ Color Gray Sold by ton
50US cities served
$31 to $42Per ton delivered
2850lb per cubic yard
24-48hTypical delivery window

About Road Base

Road Base is a construction & base material in the varies" size range with a typical density of 2850 lbs per cubic yard. Engineered, dense-graded aggregate that compacts under heavy load, the structural foundation under driveways, parking lots, slabs, and walkway pavers.

A typical residential order is 3-8 tons; full-load contractor orders run 16-24 tons. We deliver in tandem-axle dump trucks (10-16 ton capacity) or tri-axles (16-24 ton capacity). Pricing varies with regional quarry proximity, load size, and current diesel; full-load delivery typically saves 15-20% over partial loads.

Specifications

Category
Construction & Base
Typical size
varies"
Color
Gray
Density
2850 lb/yd³  ·  1.43 tons per cubic yard
Sold by
The ton
Order minimum
1 ton (bag drop)  ·  4 tons (truck load)
Full-load discount
16+ tons, typical 15-20% off list
Delivery window
Same-day on orders before 11 AM in most metros · 24-48h standard
Free delivery threshold
16+ tons within the standard service radius

Coverage: how much Road Base do you need?

Quick reference: square feet covered by one ton at common spread depths. For exact tonnage, plug your dimensions into the material calculator.

114 sq ft @ 2" deep Mulch beds, decorative tops
76 sq ft @ 3" deep Walkways, patios, drainage
57 sq ft @ 4" deep Driveways, structural base

Best uses for Road Base

How to install Road Base

  1. 1
    Strip & compact subgrade

    Remove organics; proof-roll the subgrade until it tightens up.

  2. 2
    Lay in lifts

    Place in 4" lifts; compact each lift to 95%+ modified Proctor.

  3. 3
    Moisture-condition

    A light mist before compacting helps fines bind without flooding.

  4. 4
    Check elevations

    Final base should be smooth, dense, and within 1/4" of grade.

COMPARABLE

Comparable materials

Where we source Road Base

We source Road Base from local quarries within the delivery region, typically inside a 50-mile radius. Short hauls mean lower delivery cost for you and a smaller diesel footprint per ton.

Every load is weighed at the source and the ticket travels with the truck, so you get exact tonnage, not estimates. Quality varies by quarry; we work with operators whose product meets state DOT spec for the applications we recommend.

Why bulk delivery saves money

Compared to bagged retail at the home center, bulk truck delivery comes in at roughly a third of the per-ton cost and skips the pallet-by-pallet handling. At our delivered range of $31 to $42 per ton, a 5 ton homeowner order saves hundreds versus the bagged equivalent at typical retail. A residential project usually runs 3 to 8 tons, which fits one tandem-axle truck and one drop. Contractors stepping up to 16 tons or more unlock our full-truck rate, which is generally 15 to 20 percent below the partial-load price. Bulk also wins on time: one delivery beats 20 trips to the rack, and the driver places the load where you want it instead of a parking-lot pallet.

Ordering Road Base from MyGravelBuddy

Drop your ZIP and ballpark tonnage in the form; you get a delivered quote and confirmed lead time back the same hour. Confirm the tonnage and the drop location, and we lock the truck on the schedule, typically 24 to 48 hours out for in-area orders. Payment clears, dispatch sends the window the night before, and the driver calls when the truck leaves the scale. Get a Road Base quote

FAQ: Road Base

How much does Road Base cost?
2026 delivered prices range $31-$42 per ton across our service area. Pricing varies with quarry proximity, load size, and current diesel costs. Full-truck orders (16+ tons) typically save 15-20%.
How is Road Base sold, by ton or yard?
By the ton. One cubic yard of Road Base weighs about 2850 lbs, so a 5-yard order is roughly 7.1 tons.
How much do I need for a 76 sq ft project?
At a typical 3" finished depth, one ton of Road Base covers about 76 sq ft. Use the calculator for exact numbers.
How fast can you deliver?
Same-day delivery is available in most metros for orders placed before 11 AM. Standard lead time is 1-2 business days. Holidays and severe weather can push lead time to 3-4 days.
What's Road Base best used for?
Road Base is most commonly used for Driveway Gravel, Patio Gravel, Walkway Gravel, though it works for any project that calls for construction & base material.
What's the minimum order?
1-ton minimum for bag drops; 4-ton minimum for truck loads. Most homeowners order 3-8 tons.
Do you deliver Road Base nationwide?
We serve 50 US cities directly. If your city isn't listed, send your ZIP via the contact form and we can usually confirm coverage within an hour.
Can I pick up Road Base myself?
In some markets, yes. We can stage a will-call ticket at the quarry. Email us with your ZIP to confirm.
KEEP READING

Related guides

Buy Road Base now →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop