Concrete Sand Delivery in Fort Worth, TX

Concrete Sand in Fort Worth, TX: The Coarse Aggregate DFW Builds On

Concrete sand is the coarse, washed fine aggregate that puts the strength in a concrete mix and the level in a paver bed. Graded to a true 0 to 3/8 inch and washed clean of silt and clay, this tan to gray sand drains quickly, compacts predictably, and binds with cement instead of letting fines float to the surface. Across Fort Worth and the wider Metroplex, it is one of the busiest materials we move, because almost every slab, patio, and utility trench in North Texas needs a clean fine aggregate that can stand up to the local soil.

Fort Worth sits squarely on the Blackland Prairie and its notorious expansive clays. These soils swell when wet and shrink when dry, and that constant movement is hard on anything poured or set directly on top of them. Cracked driveways, heaving slabs, and pavers that lose their level are the calling cards of skipping a proper sand layer. A clean, angular concrete sand under slab edges, paver fields, and pipe runs gives water a path and buffers the finished surface from the clay below. From new builds in the Alliance corridor to patio work in the historic neighborhoods near downtown, contractors in Fort Worth, Arlington, and Grand Prairie call out concrete sand by name.

Why Fort Worth Crews Use Concrete Sand

Around the Metroplex the same core jobs recur regardless of project size:

• Concrete mixing: as the fine aggregate in site-batched concrete for footings, mow strips, and slabs, it delivers workability without weakening the cure.
• Paver bedding: a screeded one inch layer under concrete or stone pavers builds the level, free-draining base that keeps DFW patios flat through hard clay movement.
• Pipe bedding: around utility and irrigation lines, the coarse grain cradles pipe and resists washing out during the heavy spring storms that roll across North Texas.
• Masonry work: it works into base coats and stamped-concrete scratch layers where a coarser sand outperforms a fine plaster sand.

Local Delivery and Lead Times in Fort Worth

We run bulk concrete sand throughout the DFW area, from downtown 76102 out to Arlington, Grand Prairie, Irving, Lewisville, and Carrollton. Smaller orders ship in 1 to 2 business days. Mid-size loads usually go out same or next day, which keeps a booked pour or paver crew on track. Loads of 16 tons and up unlock free delivery, so combining your concrete sand with a base rock order on one drop trims cost. Our drivers know the Metroplex freeways, the tight alleys of older Fort Worth neighborhoods, and the soft graded lots of new subdivisions, so tell us about gated entries, low clearances, or muddy access when you book.

How Much Concrete Sand Do You Need?

Concrete sand is sold by the ton. At about 2,700 pounds per cubic yard it figures to roughly 1.35 tons per cubic yard placed. For paver bedding at a one inch screeded depth, one ton covers about 300 square feet. So a 750 square foot patio behind a TCU-area home needs around 2.5 tons of concrete sand for the bedding layer.

• Paver bedding (1 inch): roughly 300 sq ft per ton.
• Pipe bedding trench: a 100 ft run at 4 inches deep and 18 inches wide takes about 5 tons.
• Small slab mix: work out the fine-aggregate share of your mix design and add 5 to 10 percent for waste.

Send over your square footage and depth and we will size the load so you do not end up with surplus sand baking in the Texas sun.

Fort Worth Pricing in Plain Numbers

Concrete sand in Fort Worth starts from $92/ton on full loads, among the sharpest pricing in our Texas markets. The rate steps down with volume. A single starter ton is $125/ton with a $239 delivery fee and arrives in 1 to 2 business days. At 6 tons and up the price drops to $112/ton with a reduced $129 delivery fee and same or next day service. Order 16 tons or more and you hit the $92/ton floor with free delivery. If your job also needs a compacted structural layer, pairing concrete sand with our Paver Base on one larger drop is the simplest way to clear the free-delivery threshold and lower your per-ton cost on both.

Placement and Installation Tips

Screed concrete sand to a uniform one inch over a compacted base, then set pavers without disturbing the bed. Do not compact the bedding sand itself; leave the structural compaction to the Paver Base underneath. For trench work in North Texas clay, cradle and shade the pipe with sand before backfilling. When you are batching concrete in the DFW summer, keep the sand damp and pour early so the mix does not flash-set in the heat. For mortar joints and softer masonry mixes, switch to Mason Sand, and keep Fill Sand for non-structural backfill and grade-raising where load is not a concern.

Seasonal Notes for Texas

North Texas building peaks in spring and fall, when temperatures are workable and the soil is not bone-dry or waterlogged. Spring brings strong storms, so plan pours and exposed sand work around the radar. The DFW summer is long and hot, which favors early-morning deliveries and diligent curing of fresh concrete. Winters are short but include the occasional hard freeze and even ice, so avoid pouring when overnight lows threaten freezing and tarp stockpiles to keep concrete sand clean and dry between phases of a longer project.

Choosing the Right Sand for Your Fort Worth Project

Matching material to task is how you control cost on a North Texas site. Concrete sand is the structural workhorse: reach for it any time a layer has to carry load, drain water, or go into a cement mix. Its coarse grain interlocks under pavers and inside concrete, which is exactly why it is the default fine aggregate across the Metroplex. When the work is a mortar bed, a tuckpoint repair, or a smooth render coat, the finer grain of Mason Sand tools more cleanly and holds tighter joints. And when you are only raising a low spot, backfilling behind a retaining wall, or bringing a pad up to grade with no load above, Fill Sand is the budget option that keeps your concrete sand for the jobs that genuinely demand it.

Plenty of Fort Worth projects combine several at once. A standard paver patio stacks a compacted Paver Base for structure, a screeded concrete sand bedding layer for the level, and joint sand on top. Ordering them together on one 16 ton or larger drop is how DFW crews clear the free-delivery tier and hold their material budget down across the whole build.

Ordering and Site Access in the Metroplex

Booking is quick: tell us the ZIP, the tonnage, and the date your crew needs it, and we confirm the delivery window. Fort Worth sites run from tight historic lots near 76102 to sprawling new pads in the Alliance corridor, so a quick note about driveway width, overhead lines, gate codes, and where you want the pile dropped lets our drivers place the sand right where you can work it. On soft, freshly graded subdivision lots, we will work out the best staging spot so a loaded truck does not rut your grade.

Whether you are pouring footings in north Fort Worth, bedding a flagstone patio in Arlington, or running irrigation lines toward Grand Prairie, our washed concrete sand gives you a clean, consistent fine aggregate delivered when you need it. Send your tonnage and ZIP and we will line up the right truck for your Fort Worth site.

About Concrete Sand

Concrete sand is a coarse, washed sand graded to a 0 to 3/8 inch size in a natural tan to gray color. It takes its name from its primary role as the standard fine aggregate in concrete production. It is screened and washed to strip out silt, clay, and organic fines, leaving angular, well-graded grain that bonds tightly with cement paste and drains freely rather than trapping water.

That clean grading is what makes it so adaptable. In a concrete mix, concrete sand fills the voids between coarse stone and cement to produce a dense, strong, workable cure. Outside the mixer, the same coarse, free-draining grain makes it the standard for paver and flagstone bedding, where a screeded layer forms a level, stable, water-shedding setting bed. It is also a top choice for pipe and conduit bedding, cradling and protecting buried lines while letting water pass instead of pooling against them.

Concrete sand weighs roughly 2,700 pounds per cubic yard and is sold by the ton, which keeps load planning simple once you know your placement depth. It compacts to a firm, supportive layer yet remains permeable, a balance finer sands cannot match. For mortar and tighter masonry joints, finer Mason Sand is the better fit, and for non-structural backfill many crews reach for cheaper Fill Sand. But where strength, drainage, and a clean setting bed all matter at once, washed concrete sand is the single material that handles every demand. Every load we ship is consistent in grade and clean enough to use straight off the truck.

What Concrete Sand costs in Fort Worth

In the Fort Worth market, concrete sand is sold by the ton and priced at the gate before delivery is added on. Pricing in Fort Worth starts at $92 per ton on full-truck loads, which works out to roughly $124 per cubic yard at the typical density of 2700 lb per yard. One ton covers about 80 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons. Compared to the TX state average for concrete sand, Fort Worth comes in lower than the typical posted rate.

How crews use Concrete Sand in Fort Worth

Crews working out of Fort Worth tend to call for concrete sand on a few repeat jobs each week. The first is pipe bedding, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is base course gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 956,709, Fort Worth pulls a mix of single-truck homeowner orders and contractor full-loads through the season.

Delivery day in Fort Worth

On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Fort Worth stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

Delivered pricing in Fort Worth

Estimate how much you need