
Fill Dirt Delivery in Sunrise, Florida
Bulk fill dirt delivered in Sunrise, FL. Brown color.
Fill Dirt in Sunrise, Florida
Sunrise is a growing community in Broward County with a population of about 100,000. Located within the Miami-Fort Lauderdale metropolitan area, the city continues to expand with both residential and commercial development. Fill dirt is sold by the ton and is essential for the grading and site prep that supports this growth. We serve Sunrise, Davie, Fort Lauderdale, Pembroke Pines, Coral Springs, and Miramar with reliable, on-time delivery.
Ordering and Delivery Lead Times
Fast delivery is a priority for Sunrise projects. Delivery in Sunrise is available with same-day or next-day scheduling for orders of 8 tons or more. Smaller orders of 3 to 8 tons typically show up in 1 to 2 business days. Orders of 15 tons or more receive free delivery plus the best per-ton pricing, making bulk orders the most economical option for larger sites and development projects.
Our scheduling is flexible and works around your project timeline. Pricing depends on order size and your ZIP code location. Quote and book your delivery online or by phone at your convenience. We coordinate with your site supervisor or general contractor to ensure smooth unloading and placement of material on your property.
Estimating Your Fill Dirt Needs
Start by measuring the length and width of the area in feet, and the desired depth in inches. To find cubic yards, use this formula: length × width × depth ÷ 324. Fill dirt is sold by the ton, so multiply your cubic yards by 1.1 to account for compaction and settling. One cubic yard of fill dirt weighs about 2,200 pounds, or roughly 1.1 tons.
For a typical Sunrise residential grading project, a 15-foot by 40-foot area filled 4 inches deep requires about 7 cubic yards, or roughly 8 tons of material. Use the calculator to get a precise estimate for your project dimensions. Always round up to the nearest ton to avoid shortfalls during delivery.
Best Uses for Fill Dirt in Sunrise
Fill dirt is the standard material for land grading and site preparation throughout the Sunrise area. Home builders use it to raise grades before construction, to fill settling areas, or to provide a stable base under new structures. Contractors preparing parking lots, building pads, or other commercial sites depend on fill dirt for a compacted, level foundation.
Homeowners order fill dirt to level yards, fill low spots after drainage work, or prepare ground for new landscaping. Property managers use it for site restoration and ground stabilization. Wherever you need solid, compacted earth, fill dirt is the material. Because it is sold by the ton, costs scale fairly with project size.
Pricing and Bulk Discounts
Fill dirt pricing in Sunrise is based on order quantity and ZIP code delivery distance. Small orders of 3 tons have a higher per-ton rate to cover fuel and handling costs. Orders of 8 tons drop the per-ton price significantly due to operational efficiencies and volume discounts. Orders of 15 tons or more get the best pricing and no delivery charge, which is the most cost-effective choice for large projects and commercial operations.
Every quote includes delivery to your Sunrise location with no hidden fees. Our pricing is transparent and competitive. Contact us with your order size and ZIP code to get a firm quote, or use our online calculator for an estimate. We will provide a complete breakdown of material cost, delivery fee, and total before you commit.
Ordering Fill Dirt in Sunrise
Place your order through our website or by phone at your convenience. We handle all scheduling, coordination, and delivery logistics for your project. Our drivers are experienced with both residential and commercial sites and can work around tight spaces, driveways, and challenging property layouts. We coordinate delivery timing with your project schedule to ensure the material arrives when you are ready to use it for grading or construction work.
Whether you are a contractor on a large commercial job or a homeowner tackling a landscape project, ordering fill dirt in Sunrise is simple and affordable. Visit our Fill Dirt in Florida resource to find information and service details across the state. Contact us today for pricing and availability.
About Fill Dirt
Fill dirt is a mixture of soil, clay, and sand formulated for grading and site preparation. It is used to raise grades before construction, to fill low spots and voids, and to provide a compacted structural base for new buildings or pavement. Unlike topsoil, which contains organic matter for growing plants, fill dirt is a dense, engineered material designed for compaction and stability.
Fill dirt is brown in color and naturally compacts as it settles over time. One cubic yard weighs about 2,200 pounds. Fill dirt is sold by the ton, making it an economical material for large projects. It is essential for residential grading, commercial site prep, parking lot construction, and any project where a solid foundation is required.
What Fill Dirt costs in Sunrise
Around Sunrise, fill dirt is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 98 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 7 ton bracket.
How crews use Fill Dirt in Sunrise
Sunrise contractors keep fill dirt on the order sheet for a short list of standard installs. Top of the list is erosion control, where the material is rolled out on rural drives and acreage projects and screeded to grade. Right behind that is driveway gravel, common across longer driveways and outbuilding work and often paired with edging or fabric below the lift. Local Sunrise orders cluster around the partial-truck range, with full loads booked for paving prep and base courses.
Delivery day in Sunrise
Delivery in Sunrise runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is 24-48h, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Sunrise
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Calculate Your Project
Estimate only. Add 10-15% for compaction and waste.
Browse more
Common uses for Fill Dirt in Sunrise
Available in nearby cities
Plan your project
Related guides
GUIDEWhat to Put Under River Rock for Landscaping BedsHere is what to put under river rock landscaping: a compacted base where needed, then landscape fabric, then rock, to stop weeds and settling.Read guide →
GUIDEHow to Clean River Rock and Restore Its ColorLearn how to clean river rock landscaping with rinsing, soap and vinegar methods, plus common mistakes to avoid for a brighter, longer lasting rock bed.Read guide →
GUIDEHow to Lay a Gravel Driveway: Step-by-Step GuidePractical, field-tested guide: how to lay gravel driveway. Pulled from real US installer notes and 2026 supplier price data.Read guide →
GUIDEDoes Gravel Stop Weeds? Honest Answer + What WorksPractical, field-tested guide: does gravel stop weeds. Pulled from real US installer notes and 2026 supplier price data.Read guide →Frequently Asked Questions
What is the difference between fill dirt and topsoil?
Fill dirt is dense, compacted earth used for structural grading and site prep. Topsoil for gardens, lawns, and landscaping on top of fill.
How do I calculate fill dirt volume?
For your measurement, express length and width in feet, and depth in inches. Multiply these three measurements, then divide by 324 to get cubic yards. Since fill dirt is sold by the ton, multiply cubic yards by 1.1 to convert to tons. A 15 by 40 foot area at 4 inches deep needs about 8 tons.
Can I use fill dirt for a backyard project?
Yes, fill dirt is commonly used for grading yards, filling holes, and preparing the base for landscaping. For areas where you will plant grass or gardens, apply topsoil over the fill dirt to a depth of 4 to 6 inches for better plant health.
How fast can you deliver to Sunrise?
Larger orders of 8 tons and up qualify for same-day or next-day delivery. Mid-range orders between 3 and 8 tons take 1 to 2 business days. Bulk orders of 15 tons or more receive no delivery charge, which saves money on large projects.
What size orders do you accept?
The minimum order is 3 tons, which is perfect for small fill projects, holes, and site prep work. Most residential grading jobs require 8 to 15 tons, while commercial sites often need 20 tons or more.
Do you provide material placement or spreading?
We deliver the fill dirt to your site. Light compaction occurs naturally as material settles. For heavy compaction or spreading, arrange a separate contractor with compaction equipment to finish the job.
Can you deliver to a commercial site in Sunrise?
Yes, we serve commercial and residential projects throughout Sunrise and the surrounding area. We handle large orders for construction sites, parking lot work, and commercial grading. Contact us with site details and access information.
What is included in the delivered price?
The price includes material and delivery to your Sunrise location. Bulk orders of 15 tons qualify for complimentary delivery with free shipping. Smaller orders have a delivery fee based on your ZIP code. You won't encounter hidden fees or unexpected charges.