Asphalt Millings Delivery in San Diego, CA

About Asphalt Millings

Asphalt Millings is a recycled material with a density around 2400 lbs per cubic yard. The color runs black. Budget-friendly alternative to virgin aggregate, made from reclaimed asphalt or concrete. Popular for driveways, base coats, and contractor-grade fills where appearance is secondary to cost and durability.

Bulk orders are sold by the ton, with full-truck deliveries (16 or more tons) saving 15 to 20 percent off partial-load rates. Tandem-axle trucks haul 10 to 16 tons per load and fit residential streets; tri-axle trucks haul 16 to 24 tons and work better for contractor pours and commercial sites. We deliver same-day in most metros for orders placed before 11 AM, with a two-hour arrival window confirmed the evening before.

Pricing depends on quarry proximity, truckload size, the current diesel rate, and seasonal demand. The cheapest path is always a full truck dropped at a single address. If your project needs more than one load, splitting deliveries across two days costs less than two separate partial loads on the same day. Send your ZIP and dimensions through the contact form for a same-hour quote that includes the delivered total and the lead time on the lane.

After delivery, plan a few hours on the day of the drop to spread or stage the material. A wheelbarrow moves about 2 cubic feet at a time, which makes longer driveways or larger beds a multi-day job by hand. A skid-steer covers ten times that pace and rents for around $200 per day in most markets, often with same-day pickup. If you cannot start work right away, tarping the pile keeps the asphalt millings dry and intact for up to a week without losing weight or color.

What Asphalt Millings costs in San Diego

In the San Diego market, asphalt millings is sold by the ton and priced at the gate before delivery is added on. Pricing in San Diego starts at $30 per ton on full-truck loads, which works out to roughly $36 per cubic yard at the typical density of 2400 lb per yard. One ton covers about 90 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons.

How crews use Asphalt Millings in San Diego

Crews working out of San Diego tend to call for asphalt millings on a few repeat jobs each week. The first is driveway gravel, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is parking lot gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 1,386,932, San Diego pulls a mix of single-truck homeowner orders and contractor full-loads through the season.

Delivery day in San Diego

On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other San Diego stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

Estimate how much you need