#57 Crushed Stone Supplier in Newton, NC
#57 Crushed Stone · Newton, NC

#57 Crushed Stone Supplier in Newton, NC

Bulk #57 crushed stone delivered in Newton, NC. Stone size 3/4 - 1. Gray color.

From $101/ton delivered, free delivery on full loads

Weight per yard 2700 lb Density 100 lb/cu ft Size 3/4 - 1

#57 Crushed Stone Supplier in Newton, NC: Local Overview

If you are comparing a #57 crushed stone supplier in Newton, NC, this page covers what the material is, how much you will need, delivery timing and current ton pricing for the area. Newton sits in the Hickory-Lenoir-Morganton, NC metro, with Hickory, Mooresville, Huntersville, Gastonia and Charlotte all within reach for reference. The city itself has roughly 13,000 residents, and orders here ship from the same statewide network that covers the rest of North Carolina. For other North Carolina cities and general specs on this product, see #57 Crushed Stone in North Carolina.

Best Uses for #57 Crushed Stone in Newton

Number 57 stone is an angular, 3/4 to 1 inch gray aggregate. Its open, uniform gradation makes it a strong pick for jobs that need water to move through the stone rather than pool on top of it.

Delivery and Lead Times in Newton, NC

Delivery timing in Newton depends on how many tons you order. Small loads of 3 to 7 tons typically ship in 1 to 2 business days. Mid-size orders of 8 to 14 tons usually move same day or next day. Orders of 15 tons or more qualify for free delivery, since a full truckload run does not carry the added handling cost of a smaller drop. Smaller loads carry a flat delivery fee that steps down as the order size grows, so it pays to combine projects into one delivery where you can.

How Much #57 Crushed Stone You Need

Number 57 stone weighs about 2,700 pounds per cubic yard, so a ton is a little under three quarters of a cubic yard. To figure cubic yards for a project, multiply length in feet by width in feet by depth in inches, then divide by 324. Convert that figure to tons by multiplying by 1.35, or just run your measurements through the calculator to get a straight tonnage estimate for your Newton project before you order.

Pricing Notes for #57 Crushed Stone by the Ton

Pricing for #57 crushed stone in Newton runs on three volume tiers. Orders of 3 to 7 tons run $214 per ton. Orders of 8 to 14 tons drop to $126 per ton. Orders of 15 tons or more run $101 per ton with free delivery included. Buying at the top tier is the most efficient way to cover a full driveway or drainage project in one trip, since the per ton rate falls as the tonnage climbs.

Ordering #57 Crushed Stone for Delivery to Newton

To order, decide how many tons your project needs, pick a tier that matches that quantity, and confirm a delivery address in Newton. Larger orders booked at 15 tons or more lock in the lowest per ton rate and skip the delivery fee entirely. Smaller test loads are available too, which is useful if you want to see the stone on site before committing to a full driveway or drainage run.

About #57 Crushed Stone

#57 crushed stone is an angular gray aggregate sized between 3/4 and 1 inch, produced by crushing quarried rock and screening it to a fairly uniform gradation. Because the pieces are angular rather than rounded, they lock together under load, which is why this size is a standard choice for driveway base, drainage projects and backfill work. It weighs about 2,700 pounds per cubic yard and is sold by the ton, which keeps loads consistent whether you are ordering three tons for a small drainage fix or fifteen tons for a full driveway.

In and around Newton, #57 stone holds up well under regular residential and light commercial traffic once it is compacted, and its open gradation lets water pass through instead of pooling, which matters in a region that sees a normal mix of rain through the year. It works as a standalone base for gravel driveways and walkways, or as the drainage layer under a concrete slab or paver patio. Contractors also use it as pipe bedding and backfill because the stone stays stable once it settles and does not break down into fine material the way softer aggregates can.

What #57 Crushed Stone costs in Newton

In the Newton market, #57 crushed stone is sold by the ton and priced at the gate before delivery is added on. Pricing in Newton starts at $101 per ton on full-truck loads, which works out to roughly $136 per cubic yard at the typical density of 2700 lb per yard. One ton covers about 80 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons. Compared to the NC state average for #57 crushed stone, Newton comes in a touch above the typical posted rate.

How crews use #57 Crushed Stone in Newton

Crews working out of Newton tend to call for #57 crushed stone on a few repeat jobs each week. The first is driveway gravel, typically laid on rural drives and acreage projects with a base lift compacted before the finish course goes on. The second is drainage gravel, which lands here across longer driveways and outbuilding work and usually ships as a 4 to 8 ton order. Order size in Newton averages 4 to 8 tons for homeowner jobs and climbs into full-truck loads for contractor work.

Delivery day in Newton

On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Newton stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is 24-48h, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in Newton

Delivered pricing in Newton

Order sizePrice / tonDelivery feeLead time
3+ tons $214 $263 1-2 business days
8+ tons $126 $141 Same/next day
15+ tons $101 Included Free delivery

Estimate how much you need

Calculate Your Project

Volume0 cu yds
Weight0 tons
Est. material$0

Estimate only. Add 10-15% for compaction and waste.

PRODUCT & CITY HUBS

Browse more

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

What is #57 crushed stone?

It is an angular gray crushed stone sized between 3/4 and 1 inch, produced by crushing quarried rock and screening it to a fairly consistent gradation. The angular shape helps the pieces lock together once compacted, which is why it is a common choice for driveway base, drainage layers and pipe backfill on residential and light commercial jobs.

What size is #57 crushed stone gravel?

Number 57 stone runs 3/4 inch to 1 inch across, with a gray color that comes from the parent rock. It is larger than pea gravel or sand and smaller than riprap, which puts it in the middle range most homeowners use for driveways, drainage and base work rather than decorative ground cover.

How much #57 crushed stone do I need for a driveway in Newton?

It depends on the length, width and depth of the driveway. A rough method is to multiply length in feet by width in feet by depth in inches, divide by 324 for cubic yards, then multiply by about 1.35 to convert to tons, since the stone runs roughly 2,700 pounds per cubic yard. The calculator on this site does that math automatically.

How fast is #57 crushed stone delivery in Newton, NC?

Timing scales with order size. Orders of 3 to 7 tons generally ship in 1 to 2 business days. Orders of 8 to 14 tons typically move same day or next day. Orders of 15 tons or more, which also qualify for free delivery, follow the same fast turnaround as the mid-size tier.

What is the price per ton for #57 crushed stone?

Pricing runs on volume. Orders of 3 to 7 tons are $214 per ton, orders of 8 to 14 tons are $126 per ton, and orders of 15 tons or more are $101 per ton with free delivery included. Buying at the highest tier your project needs is the most cost effective way to order.

Is there a delivery fee for small #57 crushed stone orders?

Yes. Smaller loads under 15 tons carry a flat delivery fee on top of the per ton price, and that fee steps down as the order size increases. Once an order reaches 15 tons or more, delivery is free, which is worth planning around if a project is close to that threshold.

Does #57 crushed stone need a base layer underneath?

For driveways and heavy traffic areas, a compacted sub base helps the stone perform better over time and resist rutting. For drainage projects, French drains and pipe bedding, #57 stone is usually placed directly against native soil or fabric, since its job there is to let water move rather than carry vehicle loads.

Can #57 crushed stone be used for drainage projects?

Yes, it is a common choice for French drains, foundation perimeter drainage and pipe backfill because its angular, open gradation lets water pass through the stone instead of pooling on the surface. It holds its shape well underground and does not compact into a solid, water blocking layer the way finer material can.

Order #57 Crushed Stone →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop