Crushed Stone Delivery in Kernersville, NC Pricing Guide
Crushed Stone · Kernersville, NC

Crushed Stone Delivery in Kernersville, NC Pricing Guide

Bulk crushed stone delivered in Kernersville, NC. Stone size varies. Gray color.

From $102/ton delivered, free delivery on full loads

Weight per yard 2700 lb Density 100 lb/cu ft Size varies

Kernersville, NC sits in the Piedmont Triad between Winston Salem and Greensboro, and a crushed stone delivery order placed here draws on the same ton priced network that covers the wider Greensboro-High Point area. About 28,000 people call this town home, and nearby High Point, Burlington and Mooresville share the identical rate structure. Because pricing is set for the region rather than for one town alone, a homeowner or contractor working in Kernersville gets the same tiered rates, the same lead times and the same free delivery threshold as the rest of the coverage zone.

Crushed Stone Delivery in Kernersville, NC

The material behind this category is quarried rock that has been crushed and screened to a workable size, then priced by the ton since a truckload is measured by weight rather than volume. Kernersville does not carry a separate price list of its own. Every order placed here runs through the same Greensboro-High Point pricing table that covers Winston Salem, High Point and the rest of the Piedmont Triad, so the rates on this page apply to any address inside town limits.

Best Uses for Crushed Stone in Kernersville

Compacted, this material sheds water instead of holding it, which is why it turns up on so many different project types around Kernersville:

Since this listing covers the general crushed stone category rather than one graded size, matching the coarseness to the job matters before a Kernersville order goes out. Coarser material suits drainage lines and heavy base work, while a finer grade suits footpaths or spots people cross on foot.

Delivery and Lead Times in Kernersville

Turnaround scales with order size. A 3 ton minimum ships in one to two business days once it is scheduled. Push the order to 8 tons and the same route usually lands same day or the next business day instead. Anything at 15 tons or beyond rides that same fast schedule, and the delivery fee drops to nothing. It is the identical three step schedule used across the whole Greensboro-High Point zone, including the towns around Kernersville such as Winston Salem and High Point.

Pricing Notes for Kernersville

The rate per ton steps down at each quantity break, which is why folding a project into one larger order almost always beats splitting it into two smaller deliveries.

Tons Ordered Rate per Ton What is Included
3 tons or more $216 Delivery fee applies, arrives in 1 to 2 business days
8 tons or more $128 Delivery fee applies, arrives same day or the next
15 tons or more $102 No delivery fee, the fastest turnaround of the three tiers

Crushed Stone in North Carolina lays out this same rate table for every city on the network, Kernersville included, so a homeowner comparing options across the Piedmont Triad can see the full picture in one place.

How Much Crushed Stone You Need

Figure cubic yards by multiplying length in feet by width in feet by depth in inches, then dividing by 324. Convert that figure to tons using roughly 2,700 pounds per cubic yard, the settled weight of this material. A 12 foot by 6 foot pad at 4 inches deep works out to about 1.2 tons, a load most trucks can bring on a single trip. Rather than running that math by hand for a Kernersville project, the calculator takes the same three measurements and returns a ton figure directly.

Ordering Crushed Stone in Kernersville

Once the ton count is set, place the order against a Kernersville address and pick the tier that matches the job. Ordering slightly above the minimum for a tier often lands within a few dollars of ordering the exact minimum, and it means one truck instead of two, since a second delivery adds a fee of its own.

About Crushed Stone

Crushed stone is quarried rock that has been mechanically broken and screened into a graded size, then sold by the ton because delivered weight, not volume, is what a truck hauls. Around Kernersville it works as the standard material for driveways, drainage runs and compacted base layers, since the angular, fractured faces on each piece interlock under a plate compactor far more tightly than smooth, rounded gravel does. A cubic yard of this material weighs roughly 2,700 pounds once it settles.

Spread and compacted, gray crushed stone sheds rainfall rather than holding it, so a driveway or base built with it on a Kernersville property stays firm through wet stretches instead of turning soft or rutted. That makes it a dependable stand alone surface, a stable base under pavers or a slab, and clean backfill around footings and drain lines. Because the category spans several distinct sizes, a quick check on grade before ordering keeps a Kernersville project on budget.

What Crushed Stone costs in Kernersville

In the Kernersville market, crushed stone is sold by the ton and priced at the gate before delivery is added on. Pricing in Kernersville starts at $102 per ton on full-truck loads, which works out to roughly $138 per cubic yard at the typical density of 2700 lb per yard. One ton covers about 80 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons. Compared to the NC state average for crushed stone, Kernersville comes in a touch above the typical posted rate.

How crews use Crushed Stone in Kernersville

Crews working out of Kernersville tend to call for crushed stone on a few repeat jobs each week. Order size in Kernersville averages 4 to 8 tons for homeowner jobs and climbs into full-truck loads for contractor work.

Delivery day in Kernersville

On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Kernersville stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is 24-48h, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in Kernersville

Delivered pricing in Kernersville

Order sizePrice / tonDelivery feeLead time
3+ tons $216 $265 1-2 business days
8+ tons $128 $143 Same/next day
15+ tons $102 Included Free delivery

Estimate how much you need

Calculate Your Project

Volume0 cu yds
Weight0 tons
Est. material$0

Estimate only. Add 10-15% for compaction and waste.

PRODUCT & CITY HUBS

Browse more

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

What is crushed stone typically used for on a Kernersville property?

Crushed stone works as a driveway surface, a compacted base under pavers or a slab, and clean backfill around footings and drain lines. Its angular, fractured pieces interlock when compacted, which gives it a firmer, more stable footing than smooth, rounded gravel on most Kernersville projects.

How fast does a crushed stone order reach a Kernersville address?

Fifteen tons and up ships with free delivery on a schedule comparable to the 8 ton tier, which typically means same day or next day. Smaller 3 ton orders generally take 1 to 2 business days instead, since larger loads are routed with priority through the regional network.

Why does the price per ton drop on larger orders?

Larger loads spread the delivery cost across more tons, so the rate per ton falls as the order grows. For Kernersville the price steps down from $216 per ton at 3 tons to $102 per ton at 15 tons and up, where the delivery fee is also waived entirely.

Does the same delivery network cover Winston Salem and High Point?

Yes, Winston Salem, High Point, Greensboro, Burlington and Mooresville all sit inside the same regional delivery network that reaches Kernersville, though each order ships to one address at a time. A separate order placed for any of those towns follows its own pricing tiers.

How much crushed stone do I need for a small path or pad?

A short garden path or equipment pad often needs well under a ton, but most deliveries are sized for a full project rather than a single small area. Measuring the length, width and depth and entering those figures into the calculator gives an exact ton count before ordering.

Is crushed stone alone enough for a driveway surface?

Yes. A properly compacted layer of crushed stone forms a firm, load bearing surface that drains well on its own, which is why it works both as a stand alone driveway and as a base under pavers or asphalt. Compacting it in layers gives the most stable result.

Can crushed stone be delivered straight onto an existing gravel driveway?

Yes, as long as a truck has clear access to the site, a load can be dropped directly onto an existing driveway to top it up. Matching the new stone to whatever grade is already down keeps the surface even, so checking the current size before ordering is worth the extra step.

What happens if I order more crushed stone than the project needs?

Very little goes to waste. Crushed stone does not degrade sitting outdoors, so extra material stores fine for a future path, drainage fix or backfill job. Since pricing drops at higher quantities, rounding an order up to the next tier sometimes costs about the same as ordering short.

Order Crushed Stone →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop