Playground Sand
Playground Sand is clean, washed sand for bedding, mixing, and paver work. Delivered in bulk by the ton with local pricing and fast turnaround.
How much Playground Sand do you need?
Tell us your project size — we’ll figure out how many tons you need. Already know? Type the number below.
Pick a project size
Or type your exact dimensions below.
Typical depths: paths 2–3 in, driveways/patios 4–6 in, drainage or backfill 12+ in.
You’ll need approximately
tons
Tap + / − or type to adjust
Recommendation
Enter your project size or quantity above.
- Weight2600 lb/yd³
- ColorWhite / tan
- Sold byton
About Playground Sand
Clean, washed sand used for pipe bedding, paver leveling, masonry mortar, and playground surfaces; the grade you need depends on the application.
| Material | Playground Sand |
|---|---|
| Category | Sand |
| Weight | 2600 lb/yd³ |
| Color | White / tan |
| Sold by | the ton |
How much will you need?
One ton of Playground Sand covers roughly:
125 sq ftat 2" deep
83 sq ftat 3" deep
62 sq ftat 4" deep
Tons ↔ cubic yards for Playground Sand
1 cubic yard of Playground Sand weighs about 2,600 lb ≈ 1.3 tons. One ton covers roughly 0.77 cubic yards.
| Cubic yards → tons | Tons → cubic yards |
|---|---|
| 1 yd³ ≈ 1.3 tons | 2 tons ≈ 1.54 yd³ |
| 2 yd³ ≈ 2.6 tons | 5 tons ≈ 3.85 yd³ |
| 3 yd³ ≈ 3.9 tons | 10 tons ≈ 7.69 yd³ |
| 5 yd³ ≈ 6.5 tons | 20 tons ≈ 15.38 yd³ |
| 10 yd³ ≈ 13 tons |
Figures are approximate: moisture and compaction change weight.
How to install Playground Sand
-
1
Excavate to depth
For pavers, dig 4-6" below finished grade; for masonry, just enough for joints.
-
2
Screed for paver base
1" of bedding sand, screeded level, is the gold standard under interlocking pavers.
-
3
Don't over-compact
Sand bedding is loose by design; compacting eliminates the leveling cushion.
-
4
Sweep joint sand last
Polymeric joint sand locks pavers; sweep dry, then mist to activate.
RELATED MATERIALS
Reviews
There are no reviews yet.