#89 Crushed Stone

Name: #89 Crushed Stone
SKU: 89-crushed-stone
Availability: InStock

#89 Crushed Stone is a versatile crushed aggregate for driveways, drainage, and base prep. Sold in bulk by the ton with fast local delivery and volume pricing.

How much #89 Crushed Stone do you need?

Tell us your project size — we’ll figure out how many tons you need. Already know? Type the number below.

Delivery ZIP

Pick a project size

Or type your exact dimensions below.

Length (ft) Width (ft) Depth (in)

Typical depths: paths 2–3 in, driveways/patios 4–6 in, drainage or backfill 12+ in.

You’ll need approximately

tons

Tap + / − or type to adjust

Recommendation

Enter your project size or quantity above.

Tons

Clear

SKU: 89-crushed-stone Category: Gravel & Crushed Stone Tags: bulk gravel, construction aggregate, crushed stone, driveway gravel

Size3/8"
Weight2600 lb/yd³
ColorGray
Sold byton

About #89 Crushed Stone

Angular, crushed aggregate that locks together under load and drains predictably, the most-used base material in the US for driveways, French drains, base courses, and pipe bedding.

Material	#89 Crushed Stone
Category	Crushed Stone
Stone size	3/8"
Weight	2600 lb/yd³
Color	Gray
Sold by	the ton

How much will you need?

One ton of #89 Crushed Stone covers roughly:

125 sq ftat 2" deep

83 sq ftat 3" deep

62 sq ftat 4" deep

Tons ↔ cubic yards for #89 Crushed Stone

1 cubic yard of #89 Crushed Stone weighs about 2,600 lb ≈ 1.3 tons. One ton covers roughly 0.77 cubic yards.

Cubic yards → tons	Tons → cubic yards
1 yd³ ≈ 1.3 tons	2 tons ≈ 1.54 yd³
2 yd³ ≈ 2.6 tons	5 tons ≈ 3.85 yd³
3 yd³ ≈ 3.9 tons	10 tons ≈ 7.69 yd³
5 yd³ ≈ 6.5 tons	20 tons ≈ 15.38 yd³
10 yd³ ≈ 13 tons

Figures are approximate: moisture and compaction change weight.

How to install #89 Crushed Stone

1
Excavate
Strip topsoil to 6-10", with the depth set by traffic and the frost line in your area.
2
Lay geotextile fabric
Optional but worth it; a woven separator stops the base from migrating into native soil.
3
Spread base layer
Spread the stone in 2-3 inch lifts and compact each lift with a plate compactor before adding the next.
4
Crown the surface
Crown the top ~1/4" per foot toward the edges so water sheds.