#67 Stone Delivery in Parma, OH
#67 Stone · Parma, OH

#67 Stone Delivery in Parma, OH

Bulk #67 stone delivered in Parma, OH. Stone size 1/2 - 3/4. Gray color.

Weight per yard 2650 lb Density 98.1 lb/cu ft Size 1/2 - 3/4

#67 Stone for Parma's Suburban and Industrial Growth

Parma has grown from a small village into a thriving suburb west of Cleveland, balancing residential neighborhoods with light industrial and commercial development. #67 Stone, an angular gray aggregate screened to three quarters to one inch, supports both. Its sharp edges interlock under compaction, creating a stable base that handles vehicle weight without the rolling and migration of rounded gravel. This matters in Parma where clay and glacial soils, seasonal freeze-thaw cycles and inconsistent fill demand a load-bearing stone that stays put.

The Parma area has the same challenging soils as nearby Cleveland: clay-heavy ground, poor natural drainage and settlement risk. Homeowners and contractors throughout Parma rely on #67 Stone to create the stable foundations that prevent driveway cracking, drainage problems and slope failure. Whether the job is a residential driveway, a commercial pad or a French drain around a foundation, this angular stone provides the base that does not compromise.

Best Uses for #67 Stone in Parma

Residential, commercial and industrial properties across Parma depend on this stone for structural support and drainage:

Parma's proximity to Cleveland means many contractors work in both communities and order #67 Stone at volumes that reach the better per-ton tiers. Suburban residential projects often run 8 to 15 tons, while commercial work and multiple-property jobs frequently exceed that. Planning your project to hit bulk pricing saves money and simplifies scheduling.

How Much #67 Stone You Need

Begin with your measurements in feet and inches. Multiply length by width by depth in inches, then divide by 324 to convert to cubic yards. Convert cubic yards to tons using the 2,650 pounds per cubic yard weight. A typical Parma driveway of 20 by 40 feet at 4 inches deep totals about 9.9 cubic yards or roughly 13 tons. Run your project numbers through the calculator before ordering, since lot size, depth and proper compaction all affect the final tonnage you will need.

Small Parma jobs, such as a single drainage trench or small pad, usually run 3 to 8 tons. Residential driveway work tends toward 8 to 15 tons or higher. Commercial properties and multi-property jobs often reach 15 tons or above, which qualifies for free delivery and reflects the scale of building in the greater Cleveland area.

Delivery and Lead Times in Parma

Order 3 tons or more and delivery typically arrives within 1 to 2 business days. For same or next-day delivery in Parma, order 8 tons or larger. Order 15 tons or more and your Parma delivery charge is waived. Parma's mix of residential neighborhoods and light industrial areas means planning your delivery point helps the driver position the stone correctly on the first pass. Confirm driveway width, alley access and any overhead obstacles before the scheduled delivery window. For detailed access information and load timing, see the page for delivery in Parma.

Pricing and Bulk Tiers

Pricing steps down as your order grows. Your exact delivered rate is calculated from your ZIP code and quantity. Per-ton prices improve at each tier, and at 15 tons the delivery charge becomes free, making bulk orders more economical for anyone planning multiple projects or commercial work.

Order size Price per ton Delivery
3 tons or more $174 1 to 2 business days
8 tons or more $86 Same or next day
15 tons or more $62 Free delivery

Ordering #67 Stone in Parma

Ordering is simple: enter your address, select your tonnage tier, and pick a delivery window. Homeowners and contractors throughout Parma, Cleveland and the wider metro use #67 Stone for driveways, foundations and drainage work. Have your access point and drop location ready before the truck arrives. Mark exactly where the load should go so the driver can place it correctly. For additional material options across Ohio, see #67 Stone in Ohio.

About #67 Stone

#67 Stone is an angular, gray aggregate crushed and screened to a consistent three quarter to one inch size, making it the standard base material for driveways, drainage systems and load-bearing applications throughout Parma and the greater Cleveland area. Unlike naturally rounded gravel, its sharp edges interlock under compaction, which is why it stays stable under vehicle weight and harsh freeze-thaw cycles instead of shifting or settling.

This material weighs about 2,650 pounds per cubic yard and is priced by the ton. #67 Stone drains fast, resists frost heave better than finer materials, and is durable long-term. Homeowners and contractors throughout Parma use it for driveway bases, French drains, retaining wall backfill, concrete slab foundations, slope stabilization and any project where a stable, well-drained foundation matters for long-term success.

The material performs well through seasonal temperature changes and heavy moisture because it is angular and maintains its shape under compaction. When properly installed in layers and compacted with a plate compactor, #67 Stone provides the solid base that prevents settling, drainage issues and the driveway failures that threaten properties in Parma's climate and soil conditions.

What #67 Stone costs in Parma

Local Parma yards quote #67 stone by the ton; the delivered number includes fuel, the truck, and the haul. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. A ton of this material spreads across about 81 sq ft when laid 3 inches deep, useful when you are sizing a patio base or a walkway run.

How crews use #67 Stone in Parma

In and around Parma, #67 stone shows up most often on two project types. The most common deployment is driveway gravel, often on rural drives and acreage projects in two to three inch lifts. Second on the list is patio gravel, which we see across longer driveways and outbuilding work on partial-truck deliveries. Most Parma loads land in the 4 to 8 ton range, with full trucks on the books for larger pads and drives.

Delivery day in Parma

A typical Parma drop is dispatched from the closest yard with a two hour window and a heads-up call once the truck is loaded. Tandem trucks want a 12 ft lane in and out; tri-axles need 14 ft, and both want firm ground at the tipping spot so the load releases cleanly. Standard lead time on this lane is 24-48h, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in Parma

Estimate how much you need

Calculate Your Project

Volume0 cu yds
Weight0 tons

Estimate only. Add 10-15% for compaction and waste.

PRODUCT & CITY HUBS

Browse more

PROJECTS

Common uses for #67 Stone in Parma

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

What is #67 stone used for in Parma?

#67 stone is an angular, three quarter to one inch gray stone most often used as a driveway base, French drain fill, and backfill for retaining walls and utility work. Its sharp edges lock together under compaction, staying stable under vehicle loads instead of rolling like rounded gravel. Parma contractors use it because suburban and commercial jobs need a material that does not migrate or settle.

What tonnage does a Parma residential driveway typically require?

A 20 by 40 foot driveway at 4 inches deep comes to approximately 13 tons. Start by measuring your actual driveway and using the calculator to convert to cubic yards, then to tons. Smaller Parma jobs run 3 to 8 tons, while larger residential or commercial work often reaches 15 tons or above.

Why is #67 stone critical for Parma's soil conditions?

Parma's clay and glacial soils do not drain naturally and can shift over time. #67 Stone is larger and angular, so it drains quickly while creating a solid, interlocked layer that does not shift. Parma's suburban properties particularly benefit because a compacted angular base prevents settling and prevents drainage failures.

Does Parma need to worry about freeze-thaw damage?

Yes. Parma winters bring freeze-thaw cycles that damage poorly prepared driveways and slabs. #67 Stone is angular and drains fast, so water does not pool inside the base layer where it could refreeze and cause heave. This material keeps your foundation stable through Ohio seasonal changes.

What is the proper installation method for #67 stone?

For structural use, spread the material in layers of 3 to 4 inches and compact each layer with a plate compactor before adding the next. Proper compaction locks the angular edges together and prevents settling. Without this step, the stone will shift once weight is applied.

Can #67 stone be used under a commercial or light industrial pad in Parma?

Yes. Parma's commercial and light industrial properties use #67 Stone as the base layer under concrete pads, parking areas and equipment pads. Its load-bearing capacity and drainage properties make it suitable for the heavy-use surfaces that require long-term stability and frost resistance.

What is the fastest delivery option available in Parma?

At 8 tons or more, we offer same or next day delivery service. At 15 tons or more, you also get free shipping along with priority handling. Orders of 3 to 8 tons typically arrive within 1 to 2 business days depending on demand and your address.

What is the difference between #67 stone and #57 crushed stone?

#57 Crushed Stone is smaller, about three eighths to three quarters inch, and works better as a finishing or leveling layer. #67 Stone is larger and more angular, making it the load-bearing base choice. Both are crushed angular stone, but #67 is selected for heavy-duty structural work where stability matters most.

Order #67 Stone →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop